What’s The Best Way To Get The Cost of Crawl Space Insulation in Bastrop, Lockhart, Elgin & Smithville?
The cost of energy has continued to rise for decades, sometimes slowly and other times rapidly, but almost never retreating. A hundred years ago people used firewood, coal, and heating oil to heat their homes and it was less expensive compared to their incomes than it is now. Because of that, they built their homes with very little insulation in the ceiling, floors, and walls which made them uncomfortably cold in the winter and hot in the summer. Now, it’s far more affordable to insulate a home with various types of insulation than it is to heat a home and the paybacks are faster than ever. Two of the most cost-effective parts of the home to get started are the attic and the crawl space.
Adding Insulation To The Crawl Space Is A Very Cost Effective Move
Since most crawlspaces are fairly easy to access and usually have little or no added insulation it’s one of the best places to get started. It can be a do-it-yourselfer job for those that are handy and athletically inclined, but most people would have a difficult time working under those conditions.
The first thing to do is find your hatch, port, or doorway into the crawlspace and take a look at what’s there. Use a flashlight and make a good long inspection so that you can see any problem areas of dry rot, insect infestations, or sunken posts that would need to be taken care of before you add any new insulation. Most of the time you’ll find that the floors in most older homes were never insulated and have nothing there.
Crawlspace Insulation Needs To Be Held In Place
Insulation in the attic or inside of most walls can be blown in and then either the walls or gravity will hold it in place without any problems. Crawlspace insulation, on the other hand, will need to be held up into the floor joists so it won’t be able to be the blow-in type, it will most likely have to be batts of either fiberglass or rock wool, you should check on the materials available and get the latest Bastrop, Lockhart, Elgin, and Smithville area crawl space insulation cost from the contractor.
They’ll need to inspect the location and make measurements of the width of the spaces between the joists. There are special holders that will have to be installed to hold the insulation up in between the joists and many contractors will recommend a vapor barrier be stapled below the insulation as well. This may depend on the local codes or the amount of dampness they encounter underneath the home.
While this is a job that many homeowners could possibly do, it’s very back breaking, tough on the knees, and requires the installers to wear masks, protective clothing, and be physically fit. Plus, you’ll note that when you get your estimate of the Austin TX area crawl space insulation costs, they have a team with plenty of experience that can quickly and easily do the job without of lot of screaming, shouting, and arguing since they really do know what they’re doing.
Next, Check out our article on the cost of insulation in Bastrop, Lockhart, Smithville, and Elgin TX